Pneumatic Drill Tips and Tricks

Pneumatic nailers, or air nailers, are terrific tools that can produce tons of work in little time. As a power tool using great force, these nailers are extremely useful, but also dangerous. It is very important to use caution and proper technique to get the best results and avoid any accidents. Here are tips to get the most out of your air nailer.

Read the manual. Every drill is different. Subtleties are important to understand, and your manual will outline important information pertaining to safety, handling, voltage, and warranty information. Understanding your tools is the best way to extend their life.

Keep the drill steady, do not attempt to make a hammer like motion. This will prevent any undesired marking to your workspace.

Never carry the nailer by the handle. Accidents can be prevented in nearly all cases.

When you are ready to nail, press the gun forward slightly. This unlocks the safety mechanism that is built into the tool to prevent unwanted discharge.

If your nails are not going far enough, increase the pressure on the hose until you are satisfied with the depth of the press.

When you nail, always make your insertion flush to the molding and receptive surface. This will help ensure a straight and level finish.

Always check the length and size of the nail. If the size is incorrect, your result will not be pleasing and it may have to be redone. Sink the nails into the frame as much as possible.

Use a brace to secure your nailing structure if necessary to prevent any damage during your work.

Make sure the area you are working with is a smooth surface. The most reported misuse of an air nailer is that they have trouble when they hit a knot in a piece of wood. In these instances, the nail might bed or curl out of the trim and ruin the molding.

Be safe. Never wear loose clothing, make sudden movements, or punch without looking around the drill. This is a power tool and should be respected as such. Never leave the drill active with children or animals present, and make measurements before nailing.

Following these tips will help ensure productivity and attention to detail. These tips should help out. A pneumatic drill can increase your efficiency seven fold, so use it to your advantage and get the job done right.